Source: wikiHow
If you’re over it with the frustration of attempting to thread a needle the old-fashioned way, try using a needle threader tool. Just insert the wire loop through the eye of the needle, then slip your thread through the larger threader hole and double it over. When you slide the needle off the loop, it will catch the thread effortlessly, and you can knot it and get right to stitching without a lot of unnecessary squinting and poking.
- 1 Hold the threader in one hand and the needle in the other. For most people, it will probably be easiest to have the needle threader in your dominant hand. If you’re right-handed, for instance, you’ll hold the tool in your right hand, while left-handed sewers will use their left. You’ll have much more coordination that way, which will allow you to focus on manipulating the small items you’ll be working with.[1]
- Make sure you’re gripping the needle so that the eye is pointing upwards.
- Those with unsteady hands may find it helpful to stabilize the needle using a pincushion or piece of cork. The larger object will hold the needle in place while you’re threading so that you won’t have to.[2]
- 2 Insert the wire threader loop through the eye of the needle. It may take a few attempts to get the two pieces lined up correctly. Push the threader until the needle rests in the shallow groove next to the base. This will keep it from accidentally slipping out.[3]
- If you’re having trouble getting the threader loop through, turn the needle slightly so you can see the opening a little better.
- You may need to push the threader gently to force it through the eye of a smaller-sized needle.
- 3 Guide the end of the thread through the threader loop.
The wire threader loop will give you a much larger target to aim at. Once you’ve got the thread inside, pull the loose end to continue feeding it through.[4]
- Needle threaders take the imprecision…
The post How to Use a Needle Threader appeared first on FeedBox.